Archive - Car Brake Tools

Car Mechanic Tools - separator for brake calipers with 1, 2 or 4 pistons pressed simultaneously, the ratchet mechanism compresses the pistons with great force, without burdening...

Car Mechanic Tools - Set of impact wrenches for Allen and slotted screws for 1/2" brake calipers 16 pcs, CrMo steel, 1/2" (12.7 mm) input, set includes special pentagonal sockets...

Car Mechanic Tools - for emptying, bleeding and changing fluids in brake systems and hydraulic clutches, set of 11 plastic plugs with rubber seal and conical plug, useful for...

Car Mechanic Tools - supports ABS and ESP braking systems as well as electro-hydraulic brakes, the set is equipped with an angle coupling, which facilitates access to hard-to-reach...

Car Mechanic Tools - Satra S-8DURIP brake line clamps, universal set of pipe plugging pliers, to prevent the loss of fluids in the fuel, brakes, air conditioners and power steering...

Car Mechanic Tools - M9 x 1.25 mm

Car Mechanic Tools - M6 x 1.0 mm

Car Mechanic Tools - M8 x 1.25 mm

Car Mechanic Tools - M8 x 1 mm

Brake Piston Press - Brake piston presser, right and left hand thread, 23 pcs QUATROS QS70061, Set contents:19 pcs. Adapters, 1 pc of press with left-hand thread, 1 pc of press...

Brake Piston Press - set consists of 35 elements that fit most cars

Car Mechanic Tools - Socket 10-point 15mm for brake calipers AUDI Q7 S8, PORSCHE Macan Cayenne Cayman, 15mm 10-point socket for brake caliper

Car Mechanic Tools - Professional pearling press for brake pipes 4.75 mm and 3/16"

Car Mechanic Tools - Strong lever for removing truck and trailer brake springs

Car Mechanic Tools - Adapter for brake pistons - Ford Focus, C - Max, S - Max, Renault Scenic, Megan, Iveco Daily, Volvo V70, 3 pins, Pitch / diameter 31 mm, Pin diameter 6 mm, Pin...

Car Mechanic Tools - Brake piston extruders, for servicing press-fit (front brakes) and bolt-on calipers (rear brakes)

Car Mechanic Tools - A product used to bleed the brake system, checking the vacuum sensors, the throttles, exhaust gas recirculation valve, brake booster, fuel pressure regulator,...

Car Mechanic Tools - Hydraulic set for adjusting and pearling the ends of the brake pipe of a car, with hydraulic spindle , The set includes: jaws for pipes with a diameter of 4.75...

Car Mechanic Tools - Cutting agent, splitting of nuts 3-24 mm, For cutting heavily rusted nuts, without damaging the screw thread, 360° swivel, To remove nuts with damaged heads,...

Car Mechanic Tools - Perforating knife for cutting brake pipes and tubes with diameters of 3-35mm, Range: 1.8" - 1" 3/8" 3-35mm