COMPASS Parking Assist 4 sensors, LED display

You can enhance your car with a modern system that makes parking a piece of cake. This parking assist will display the distance by means of LED indicators and a numerical indicator, so you will be aware of the remaining space behind your vehicle. It also signals with a beep at a distance. Just put the car in reverse and the system is activitated. The sensors operate on the ultrasonic wave principle so they reliably capture any fixed obstacle (both metallic and non-metallic). Sensors are mounted in the rear bumper, and the corresponding drill bit is supplied.

Key features

• Complete system to simplify parking
• An overview of the area behind the car gives you the indicators, the display and the audio signal
• Reliably detects solid obstacles (ultrasound detection)
• Obstacle detection from 0.3 to 2.5m
• Rear bumper mounted sensors (including a suitable drill)

Parameters and Specifications:

Sensors:
Obstacle detection: 0.3 - 2.5m
Frequency: 40kHz
Operating temperature: -20°C to +70°C
Scan angle: vert. 60°; horiz. 120°
Number of sensors: 4
Sensor mounting hole: 22mm
Sensor colour: black, glossy

Power supply:
Standard: 12V (10.5 to 16V)
Power consumption: 40 - 300mA

Packaging:
Display
4 sensors for rear bumper mounting
Corresponding cabling
Drill of corresponding diameter