CONNECT IT ClipMic Pro Lightning (2 pcs + receiver) set BLACK
CONNECT IT ClipMic Pro Lightning (2 pcs + receiver) set BLACK
CONNECT IT ClipMic Pro Lightning is a set of two wireless lapel microphones with receiver and charging case designed for mobile devices with Lightning connector. The set is suitable for video production, interviews, podcasts, streaming and mobile audio recording. The 2.4GHz wireless transmission, compact size and light weight make it easy to use at home and in the field. A protective case and power cord are also included.
Lapel
Microphone type
Omnidirectional
Directional characteristic
20 - 20 000 Hz
Frequency range
4 hours
Max. battery life
Key features of the microphone set CONNECT IT ClipMic Pro Lightning (2 pcs + receiver), black
- CONNECT IT ClipMic Pro Lightning Kit includes 2 wireless microphones and a receiver with Lightning connector
- Suitable for iPhone and iPad
- 2.4 GHz wireless transmission
- Range up to 20 m
- Microphone life up to 4 hours
- Charging case with 700 mAh capacity
- Omnidirectional sound sensing
- Possibility to charge the phone via the receiver
- Protective case included
Suitable for mobile, stream and video production
Wireless recording and use
A set of two microphones allows simultaneous recording of two people without the need for cables. The solution is suitable for interviews, moderation, online content or instructional videos. Wireless transmission operates in the 2.4 GHz band and reaches distances of up to 20 metres. The compact size of the receiver makes it easy to connect directly to your phone or tablet. The design is adapted for mobile use indoors and outdoors.
Sound parameters and microphones
The CONNECT IT ClipMic Pro microphones use omnidirectional characteristics that pick up voice from all sides. The frequency range of 20 Hz to 20 kHz covers the entire audible band. The sensitivity is -38 dB. The signal-to-noise ratio is below 65 dB. Each microphone is equipped with a clip for attaching to clothing during a recording or call.
Power and mobility
Each microphone contains a 60 mAh battery and offers a recording time of up to 4 hours. It takes approximately 1 hour to charge the microphone. The 700 mAh charging case allows up to four full microphone recharges. The case itself takes approximately 2 hours to charge. The receiver also allows pass-through charging of the phone during use.
Package design and contents
The dimensions of the microphone are 60 x 22 x 15 mm and the weight of one piece is 7.3 g. The receiver has dimensions 44 x 26 x 8 mm and weight 4.4 g. Included are 2 microphones, wireless receiver, charging case, protective case, power cable and user manual.
Technical specifications
- Connecting the receiver: Lightning
- Wireless transmission: 2.4 GHz
- BT chipset: JL 6973D4
- Sensitivity: -38 dB
- Signal to noise ratio: 65 dB
- Range: up to 20 m
- Microphone charging time: 1 h
- Charging time of the case: 2 h
- Microphone battery capacity: 60 mAh
- Battery capacity of the charging case: 700 mAh
- Number of recharges from the case: up to 4×
- Compatibility: iOS (iPhone / iPad with Lightning)
- Microphone size: 60 x 22 x 15 mm
- Dimensions of the receiver: 44 x 26 x 8 mm
- Size of the charging case: 53 × 37 × 69 mm
- USB-A/USB-C power cable length: 290 mm
- Microphone weight: 2× 7,3 g
- Weight of the receiver: 4.4 g
- Colour: black
Package contents
- Microphone CONNECT IT ClipMic Pro, 2 pcs
- Windscreen filter, 1 pc
- Wireless receiver
- Charging case
- Power cable
- User manual
The principle of the microphone
The dynamic microphone is suitable for open performances, live input, music production, etc. It uses a magnet and a moving coil to capture sound.
You will use a condenser microphone mainly for studio purposes. It has higher sensitivity and lower noise. It is necessary to power it separately.
Frequency range
The frequency range indicates the range of frequency values that the microphone records. The higher the range, the more sounds it can record.
Low frequencies (e. g. 20–200 Hz): Bass, the deepest tones of instruments (double bass, kick drum) and male voices.
Medium frequency (e. g. 200–3000 Hz): The body of the instruments, the base of the voice, where the ear is most sensitive, important for speech intelligibility.
High frequencies (e. g. 3000–14000 Hz): Treble, detail, sibilance and " shine" of the sound.
Airband (above 14000 Hz): It gives recordings a sense of expensive, super-quality sound and space.
Sensitivity
Microphone sensitivity is the ratio of output voltage to sound pressure. It expresses how loud a signal a microphone produces at a given sound pressure; higher sensitivity means stronger voltage and is suitable for quiet studios, while lower sensitivity is better for noisy environments as it will amplify less ambient noise unnecessarily.
Specifications
Connection
Microphone characteristics
Power Supply
Battery
Features
Dimensions
Weight
| Code: | JD733e2 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
IT TRADE a.s. Brtnická 1486/2101 00 Praha 10 -Michle, [email protected], +420 226 253 253 CONNECT IT was established in 2010 and since inception, its sole purpose has been to provide products with excellent price-performance ratio. They were tired of products with prices unreasonably high for the actual value of the product. Products by CONNECT IT under go extensive testing before they are offered to customers, and evaluation is based on the quality of design, practicality, durability and reliability. From the brand CONNECT IT, you'll find accessories for personal computers, mobile phones, tablets, and audio-visual equipment. You can also find keyboards, mice, memory card readers, USB drives, speakers, headsets, network elements, flash drives, power adapters for laptops, chargers and external batteries for mobile phones, brackets for LCD, LED lights, plasma televisions and projectors. Gamers will appreciate the high-quality equipment, which is regularly ranked near the top of sales charts. 
|