Prodipe CL21
Prodipe CL21
Prodipe CL21 microphone works as a condenser instrument transducer with an electret capsule designed for cello. The transducer uses a cardioid polar pattern, which suppresses ambient background noise. A 1500mm cable with a Mini XLR connector and the included standard XLR adapter connect the device. Designed in France by IPE MUSIC / PRODIPE, this device captures string instruments on stage and in the studio. The design requires phantom power to operate and features a frequency response of 50 to 20000Hz.
Stand mount (threaded)
Microphone type
Condenser
Microphone principle
Cardioid
Polar pattern
50 to 20000Hz
Frequency range
Key features of the Prodipe CL21 microphone
- Flexible clamp for easy mounting between the tailpiece and the bridge
- Electret capsule handles high sound pressure levels up to 140dB
- Integrated low-cut filter in the adapter suppresses the lowest frequencies
- 1500mm cable with a Mini XLR connector
- Compatibility with Prodipe UHF Lanen Series 21 wireless systems
- Included windshield dampens ambient noise
- Adapter converts the Mini XLR connector to standard XLR
Suitable for stage, lectures, studio use and musical instruments
Sound capture and polar pattern
The manufacturer developed the electret capsule directly in France. A cardioid polar pattern captures tones primarily from the front, eliminating distracting background noise. This element faithfully transmits the full range of cello tonal colours without distortion. The transducer easily handles high acoustic pressure up to 140dB SPL. This gives you a clean recording of every nuance of your performance.
Ambient noise suppression and wind protection
The microphone design effectively dampens vibrations from the body of the instrument. The package includes a foam windshield to prevent pops and wind noise during play. A built-in low-cut filter in the adapter suppresses the lowest frequencies. This filter removes rumble and low-frequency ambient noise. The resulting sound retains its clarity even in acoustically challenging venues.
Cable and connection of the Prodipe CL21 microphone
A 1500mm cable runs from the microphone, offering plenty of freedom of movement. The cable terminates in a Mini XLR connector. The package includes an adapter that converts the signal to a standard XLR connector for connection to a mixing console. This solution enables seamless integration with standard audio equipment. Secure connections prevent accidental disconnection during performances.
Wireless transmission and range
This microphone offers high flexibility thanks to wireless operation. The device is fully compatible with Prodipe UHF Lanen Series 21 wireless systems. Once connected to the transmitter, the musician can move freely around the stage without being restricted by cables. Operating in the UHF band, the system preserves the original characteristics of the signal. Wireless transmission significantly expands stage presentation possibilities.
Power supply, battery and charging
When wired, the microphone requires 48V phantom power. This power passes through the XLR adapter directly from a mixing console or audio interface. For mobile use, you can use the optional BP21 power pack powered by a 9V battery. Alternatively, the microphone draws power directly from a connected wireless transmitter, giving you several operating options to suit the situation.
Mounting and instrument protection
The manufacturer designed the mounting system with the safety of your instrument in mind. The flexible clamp is easy to install between the tailpiece and the bridge of the cello. Soft materials and effective insulation protect the wood from scratches. The gooseneck allows precise aiming of the capsule close to the soundboard or over the strings. The stable mount reliably holds its position even during intense playing.
Connector compatibility
The Mini XLR connector on the cable ensures compatibility with wireless bodypacks. Use the included adapter to connect the microphone to any XLR input, allowing you to easily connect the transducer to audio interfaces and mixing consoles. The system works seamlessly with professional sound systems. Broad compatibility facilitates integration into existing audio setups.
Technical specification
- Transmitter connector: Mini XLR
- Cable length: 1500mm
- Impedance: 2200 Ohm
- Sensitivity: -47dB ±3dB
- Maximum SPL: 140dB
- Signal-to-noise ratio: 68dB
Package contents
- 1× windshield
- 1× case
- 1× adapter
- 1× cable
Microphone operating principle
Dynamic microphone is suitable for live performances, outdoor broadcasts, music production, and more. It uses a magnet and a moving coil to capture sound.
Condenser microphone is ideal mainly for studio recording. It features higher sensitivity and lower noise levels, and requires an external power supply.
Frequency range
The frequency range indicates the span of frequencies that the microphone can record. The wider the range, the more sounds it can capture.
Low frequencies (e.g. 20–200Hz): bass, the deepest tones of instruments (double bass, kick drum) and male voices.
Mid frequencies (e.g. 200–3000Hz): instrument body, the core of vocal sounds where the ear is most sensitive, essential for speech clarity.
High frequencies (e.g. 3000–14000Hz): treble, detail, sibilance, and audio "brightness".
Air band (above 14000Hz): adds a sense of high-end, premium sound quality and space to recordings.
Sensitivity
Microphone sensitivity represents the ratio of output voltage to acoustic pressure. It determines how strong a signal the microphone produces at a given acoustic pressure – higher sensitivity results in a stronger voltage and is ideal for quiet studios, while lower sensitivity suits noisy environments as it reduces ambient noise amplification.
Specifications
Connection
Microphone characteristics
Power Supply
Features
Dimensions
Weight
| Code: | EQUmikr05 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
IPE MUSIC 20, rue Clément Ader - ZA Les Gloriets Les Sables d'Olonne - France (+33) 2 51 32 20 35 [email protected] 
|